Blow-molded pallets have blow-molded holes on the exterior surface, and they are all empty in the middle. Only double-sided pallets can be produced, but single-sided pallets cannot be produced. Moreover, the direction of product feeding is generally two-way feeding; the surface of injection-molded pallets can be divided into flat plates. , Grid and other shapes, the bottom has a variety of structures such as Sichuan, Tian, seven corners, nine feet, etc. The products can be produced on one side or two sides, which can meet the needs of customers in different industries, and the flexibility will be greater. Blow-molded pallets are compared with injection-molded pallets. Blow-molded pallets are lighter and have insufficient load. Normally, the dynamic and static loads are about 1 ton, and they cannot be racked. They are generally used for nine-foot pallets. However, injection pallets are usually heavier in quality and have a large load capacity, and they can meet the needs of various application scenarios.